LLR should be only performed in specialized centres to ensure safety and strict adherence to orthodox surgical indication. Copyright (c) 2011 S. Karger
AG, Basel”
“A polymerized film of glycine (Gly) was prepared on the surface of carbon paste electrode (CPE) through the cyclic voltammetry (CV) technique. A novel biosensor for the determination of dopamine (DA) has been constructed based on horseradish peroxidase (HRP) and multiwalled carbon nanotubes (MWCNTs) immobilizing on Poly (Gly)/CPE through silica 4-Hydroxytamoxifen molecular weight sol-gel (SiSG) entrapment. CV measurements were employed in order to understand the feasibility of poly (Gly) as an electron carrier between the immobilized peroxidase and the surface of CPE. By using differential pulse voltammetry (DPV) the calibration curves of DA was obtained in the range of 15-865 mu M. The limit of detection (LOD) and limit of quantification (LOQ) of DA was found to be 6 x 10(-7) M and 2 x 10(-6) M respectively. The apparent Michaelis-Menten constant (K-m(app)) was found to be 0.5 mM and illustrated that the good biological activity of the fixed enzyme. Electrochemical impedance spectroscopy (EIS) results confirmed the rapid electron transfer and also the immobilization of enzyme on the electrode surface. The biosensor showed high
sensitivity, selectivity and reproducibility. This GSK-3 activation method has been used to determine DA in the presence of various interferences and in clinical preparations. (c) 2014 Elsevier Inc. All rights reserved.”
“In the quest of bright and long persistent far-red/near-infrared phosphors for in vivo optical imaging, the interest in the family of ZnGa2O4 spinel compounds doped with
Cr3+ has been aroused in the most recent years. We show that the dopant concentration plays an important role in the total persistent luminescence output of the material. ZnGa2O4 doped with 0.25%, 0.50% and 0.75% Cr relative to (Ga + Cr) was prepared by solid state synthesis. 0.50% Cr was found optimal to obtain the most intense persistent luminescence after matrix excitation with BEZ235 X-rays or localized excitation in Cr3+ absorption band with 550 nm wavelength. Up to 0.5% Cr content, persistent luminescence increases as a consequence of an increased number of Cr3+ luminescent centers and associated defects. With 0.75% Cr content, a too large number of defects locally concentrated around Cr3+ ions are detrimental to the long-term persistent luminescence intensity. We supplement long lasting phosphorescence investigation with laser excited photoluminescence and thermally stimulated luminescence results. (C) 2014 Elsevier B.V. All rights reserved.”
“The transport of manufactured titanium dioxide (TiO2, rutile) nanoparticles (NP) in porous media was investigated under saturated conditions.